 |
 |
 |
 |
 |
|
 |
|
 |
|
 |
    The efficient printing solution 30 ppm colour/mono Brilliant colours Especially for workgroups in small and medium enterprises The printer for professional demands DELACAMP offers a wide range of products for the remanufacturing of this cartridge HP CLJ 4700/ 4730/ CP4005     DELACAMP offers a wide range of products for the remanu- facturing of the HP2600/ HP2605/ HP1600 and CM1015/ CM1017     T-640 SERIES: Value-priced, high-performance workgroup printers. Broad range of paper-handling options. Printing speeds ranging from 33 to 48 ppm. First page out as fast as 6 seconds (T-640). DELACAMP offers the following products for the remanufacturing of the T640 series (Lexmark T640, 642, 644, X640, 642, 646, IBM Infoprint 1532, 1577, 1650 MFP, 1570 MFP and Dell 5210) cartridges.    The Samsung CLP-300 is an inexpensive colour laser printer built with SAMSUNG’s exclusive NO-NOIS™ technology targeted at the SOHO market. The Samsung CLP-300 is remarkably small for a colour laser printer, owing to a unique toner configuration (see pictures below). The CLP-300 series prints at 16ppm in black and white and at 4ppm in colour.  DELACAMP offers the following products for the remanufacturing of the CLP-300 and CLX-3160, CLX-2160 and Xerox Phaser 6110.   Why they should be replaced:  Wear depends on print job length, not just number of pages.
Some “virgin” sleeves can have 6 times more wear than others
No practical way to measure wear – may not be visible
Varying wear means every cartridge will print with a different density
Worn sleeve may cause density to drop noticeably during the cycle
Uneven wear will cause “banding” effect
Scratches due to wear or transport damage can cause deletions and lines
High Yield and “Jumbo” carts make extreme demands on mag sleeve life
Problems you can get with a worn OEM MRS include:  Low density
Density variation during use
Horizontal or vertical light bands
Lines and deletions
 DELACAMP offers the following MRS:  Also available from DELACAMP: Developer Rollers, PCRs, Toner, OPC, Chips, Blades, Plastic Parts, etc.     With printing speeds of up to 18ppm and up to 1200dpi using FastRes It provides fast and clear prints at low costs With a first page out as fast as 8 sec. it will not let you wait for your prints    Wear and extended storage of empties can damage the OEM blades. DELACAMP blades are matched with our drums and toner.   ...All of these problems can be caused by either old, damaged OEM blades or by new components which are not properly matched to the rest of the system. DELACAMP blades are not only the best quality available but also are totally compatible with our drums, toners and other components.   The Lexmark T640 series provides excellent performance for the office. Due to a 400MHz processor the T640 series can print at up to 48 pages per minute with resolutions up to 2400 d.p.i. Options are available to increase productivity such as additional paper cassettes, upgrades for memory and hard disks, wireless print servers and finishers. The T640 series has proved to be very popular in the traditional Lexmark market. DELACAMP offers the following products for the remanufacturing of the T640 series (Lexmark T640, 642, 644, X640, 642, 646, IBM Infoprint 1532, 1577, 1650 MFP, 1570 MFP and Dell 5210) cartridges.   These printers are favourite in the SOHO and personal printer markets and share the same cartridge design and components but have different fill weights. At 5ppm faster, the follow-up to the LaserJet 3600 is the LaserJet 3800 series printers. Price and print speed are the only major differences between these printers. The HP 3000 Color LaserJet series printers are faster when printing B/W but slower when printing color. The HP 2700 is currently only being marketed in the UK. The newly introduced CP3505 uses the same cartridges as the HP 3800. DELACAMP offers a wide product range for the remanufacturing    Lowered cost/performance ration – Printing speeds of up to 30ppm in color  Better Quality – 1200dpi is just around the corner  Increased competition between the OEM in the color market  Colour Multifunctional Machines – low cost alternatives to colour copiers DELACAMP is a leader in colour components for the Aftermarket Colour toners Colour chemical (polymerized) toners OPC for Colour cartridges Chips Blades Roller Plastic Parts Tools, etc. For the most relevant OEMs such as: HP Samsung Lexmark Konica Minolta/QMS Epson Brother Oki Dell Xerox, etc. Please contact your Delacamp Sales Executive or browse our ONLINE SHOP for more Information on our wide range of products for the remanufacturing of colour laser cartridges   Space-saving design allows you to put the printer where you want it – even on your desktop Instant-on Technology ensures a first page out as fast as 20 seconds Print speeds of up to 8 ppm – color and black and white DELACAMP offers a wide range of products for the remanufactu- ring of the HP2600/HP2605/HP1600 and CM1015/CM1017    The winners have been announced! Congratulations to all the winners.   The HP LaserJete P3005 can be viewed as the HP2400 replacement The HP P3005 is ideal for document-intensive environments requiring high-quality and low maintenance Instant-on Technology ensures a first page out as fast as 9.5 seconds, even when the printer has been in sleep mode Fast print speeds of up to 35 ppm With its small size, the printer fits where you want it - even on your desktop  DELACAMP offers the following products for the remanufacturing of the HP P3005 cartridges.           |
 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
